Featured
Product family information
The Philips CorePro LED PLC integrates a LED light source into a traditional fluorescent form factor. This product is the ideal solution for uplamping in general lighting applications: it meets basic lighting requirements, offers significant energy savings, and is environmentally friendly.
Features
Highly energy-efficient
Easy installation
Conventional form factor to fit into existing luminaires
No mercury
Applications
Hospitality, retail, office, industrial and home applications
Replaces 2-pin GX23 CFL
The Lunera CFL LED GX23 is a plug-and-play LED replacement for 13W CFLs with 2-pin GX23 bases. It supports both ballast-driven and ballast-bypass operation and is ideal in commercial wall sconces and specialty applications such as step lights.
Key Features
Directly replaces 13W GX23 CFL lamp (2-pin)
Supports both ballast driven (plug and play) installation and line driven installation at 120V/277V
Delivers up to 535 lumens of usable light
Replaces 2-pin vertically mounted G24d CFL
The Lunera CFL LED G24d Lamp is a plug-and-play LED replacement for CFLs downlights with 2-pin G24d-series bases. The ballast driven CFL lamp is ideal for commercial recessed downlights and pendants.
Key Features
Directly replaces 18W or 26W G24d-series CFL lamp (2-pin)
Ballast Driven plug and play installation
Delivers up to 1,000 lumens of usable light
Replaces vertically mounted 4-pin G24q CFL
The Lunera CFL LED G24q Lamp is a plug-and-play LED replacement for CFLs with 4-pin G24q-series bases. The ballast driven CFL lamp is ideal for commercial recessed downlights and pendants.
Key Features
Directly replaces 26W, 32W, and 42W CFLs (4-pin)
Plug-and-Play installation
Delivers up to 1,000 lumens of usable light
Replaces PLL Fluorescent Lamp
The Lunera PLL LED lamp is a Ballast Driven (plug-and-play) LED replacement for a 55W/40W/36W 4-pin long compact fluorescent lamp. It operates off of the existing electronic ballast and supports instant start, rapid start, and programmed start electronic ballasts.
Key Features
Emits light over 330° of its surface
Delivers over 50% in energy savings
Supports ballast driven (plug-and-play) installation (Instant-, Rapid-, and Programmed-Start)
Replaces PLL Fluorescent Lamp
The Lunera PLL LED lamp is a Line Driven (ballast bypass) LED replacement for a 55W/40W/36W 4-pin long compact fluorescent lamp. Its built-in universal driver allows lamp operation at 120V~277V.
Key Features
Directly replaces 2G11 PLL lamp up to 55W
Supports 120V ~ 277V Line Driven (ballast bypass)
Delivers up to 2,600 lumens of usable light
LED Light Technology's LED 2G11 bulb will make your existing CFL fixture more efficient by increasing the lamp life hours, reducing maintenance cost, and virtually eliminating heat!
The 5 and 7 watt LED PL Lamps are available in GU24, E26 as well as GX23 and G24q pin base options to replace inefficient 13- and 18-watt compact fluorescents lamps (CFLs). The LED PL lamps ensure a long 50,000-hour lifetime, and deliver an 80 CRI with uniform consistency compared to CFLs. The lamps operate on a 120-277 volt system to easily retrofit into a variety of residential applications, including recessed cans, sconces, and ceiling fixtures.