Plug & Play PLUS™ 2 foot LED Tube Compatible with Electronic Ballast and Line Voltage
LED Light Technology Ballast Compatible LED Plug & Play PLUS™ tubes use a patented electrical circuit which is compatible with electronic and inductive ballasts. Our LED Plug & Play PLUS™ tube is easy to install. There is no rewiring needed!
In addition the PLUS unique feature allows this LED tube to be used AFTER the ballast fails by bypassing the ballast and operating on line voltage. This is a unique and valuable feature. You save energy immediately and after the ballast fails without replacing the LED tubes.
Plug & Play PLUS™ 3 foot LED Tube Compatible with Electronic Ballast and Line Voltage
LED Light Technology Ballast Compatible LED Plug & Play PLUS™ tubes use a patented electrical circuit which is compatible with electronic and inductive ballasts. Our LED Plug & Play PLUS™ tube is easy to install. There is no rewiring needed!
In addition the PLUS unique feature allows this LED tube to be used AFTER the ballast fails by bypassing the ballast and operating on line voltage. This is a unique and valuable feature. You save energy immediately and after the ballast fails without replacing the LED tubes.
Plug & Play PLUS™ 4 foot LED Tube Compatible with Electronic Ballast and Line Voltage
LED Light Technology Ballast Compatible LED Plug & Play PLUS™ tubes use a patented electrical circuit which is compatible with electronic and inductive ballasts. Our LED Plug & Play PLUS™ tube is easy to install. There is no rewiring needed!
In addition the PLUS unique feature allows this LED tube to be used AFTER the ballast fails by bypassing the ballast and operating on line voltage. This is a unique and valuable feature. You save energy immediately and after the ballast fails without replacing the LED tubes.
Plug & Play PLUS™ High Output 4 foot LED Tube Compatible with Electronic Ballast and Line Voltage
LED Light Technology Ballast Compatible LED Plug & Play PLUS™ tubes use a patented electrical circuit which is compatible with electronic and inductive ballasts. Our LED Plug & Play PLUS™ tube is easy to install. There is no rewiring needed!
In addition, the PLUS unique feature allows this LED tube to be used AFTER the ballast fails by bypassing the ballast and operating on line voltage. This is a unique and valuable feature. You save energy immediately and after the ballast fails without replacing the LED tubes.
LED Tube 8-Foot LED Plug & Play PLUS™
LED Light Technology Ballast Compatible LED Plug & Play PLUS™ tubes use a patented electrical circuit which is compatible with electronic and inductive ballasts. Our LED Plug & Play PLUS™ tube is easy to install. There is no rewiring needed!
In addition, the PLUS unique feature allows this LED tube to be used AFTER the ballast fails by bypassing the ballast and operating on line voltage. This is a unique and valuable feature. You save energy immediately and after the ballast fails without replacing the LED tubes.
Base Options: Fa8, R17d or G13
LED Plug & Play U-BEND™ Tube Direct Replacement for Fluorescent U-Tube
2 foot U-BEND LED Plug & Play replacement for electronic ballast T8 luminaries. Easy to install, no wiring changes!
Instant Start Ballast Compatible LED Tube- U Bend
LED Light Technology’s Instant Start ballast compatible tube eliminates the need for rewiring and allows fixture to maintain original UL compliance. It is an ideal energy saving choice for existing linear fluorescent fixtures.
Instant Start Ballast Compatible LED Tube- Linear
LED Light Technology’s Instant Start ballast compatible tube eliminates the need for rewiring and allows fixture to maintain original UL compliance. It is an ideal energy saving choice for existing linear fluorescent fixtures.
Magnetic LED Retrofit Kit for Fluorescent
Update your existing fluorescent fixtures with LED Light Technology’s Magnetic LED Retrofit Kit for Fluorescent. This Retrofit kit installs in 3 or 4 minutes, with only your bare hands. As you can see in the photos, there is no need to remove the existing ballasts or sockets from the fluorescent fixture. Just pop off the ballast cover, disconnect power from the ballast, connect power to the LED driver, and plug the driver into the LED strips. It’s that simple! The LED strips and the driver are magnetic backed, so they literally attach themselves to the troffer body in seconds.
Plug and Play T5 LED Tube
2, 3 and 4 foot LED Plug ‘n Play replacement for electronic ballast T5 luminaries. Easy to install, no wiring changes!
Click here for Product Specification Sheet
Click here for an example of savings obtained by using this product.
Plug and Play T5HO LED Tube
2, 3 and 4 foot LED Plug ‘n Play replacement for electronic ballast T5 High Output luminaries. Easy to install, no wiring changes!
Click here for Product Specification Sheet
Click here for an example of savings obtained by using this product.
Line Voltage T5 LED Tube
2 and 4 foot LED Line Voltage replacement for T5 luminaries. Easy to install, Simple ballast bypass!
Line Voltage T5HO LED Tube
2, 3 and 4 foot LED Line Voltage replacement for T5 High Output luminaries. Easy to install, Simple ballast bypass!
Dimmable LED Replacement Tubes with External Power Supply
Update your existing T12 and T8 fluorescent with LED Light Technology’s Dimmable 4 foot LED Tubes! This dependable and innovative technology saves time, energy and money while providing maintenance-free performance for 100,000 hours!
LED Tube Replacement with Microwave Motion Sensor
The LED Light Technology Line Voltage Microwave Sensor LED tubes provides ultimate energy savings. Low wattage LED paired with Microwave Sensor technology assures that lights are conserving maximum energy by turning off when no motion is detected. Each tube has a sensor integrated so there is no need to break ceiling tiles or fumble with old wiring to add an independent control.
Click here for Product Specification Sheet
Click here for an example of savings obtained by using this product.
Philips EvoKit
Product family information
The Philips EvoKit LED Retrofit is the ideal solution for switching from linear fluorescent lighting to an LED solution. This system is designed to be affordable, long lasting, and produce the quality light typical in Philips LED systems. The EvoKit, at efficacies up to 110 lumens per watt, produces enough light to replace most traditional fluorescent troffers, while consuming significantly less energy.
Features
Efficacy up to 110 lm/wSimple installation in under 5 minutes Multiple sizes, color temperatures and lumen packages available
New fixture look and performance without the need to enter the ceiling. Suitable for use with Bodine emergency backup BSL310
Applications
Offices, Schools, Healthcare, Retail, Government
Philips MASTER LEDtube for electromagnetic (EM) ballast installations
Product family information
The Philips MASTER LEDtube integrates a LED light source into a traditional fluorescent form factor. Its unique design creates a perfectly uniform visual appearance which cannot be distinguished from traditional fluorescent. For those that are looking for value for money within limited budget and re-lamping efforts for better light effect and lifetime.
Features
Only 50% energy consumption compared to fluorescent tubes, Extra-long life of 50,000 hours. Retrofit to existing T8 lamps on EM ballast installations. Full safety features and EM Protector safety device No mercury
Applications
Parking lots / covered car parks
Warehouses / coldrooms / signage
Transport and distribution areas
Food & Museums
Philips CorePro LEDtube for electromagnetic (EM) ballast installations
Product family information
The CorePro LEDtube is an affordable LED solution suitable for replacing T8 fluorescent lamps. The product provides a natural lighting effect for use in general lighting applications, as well as instant energy savings – an environmentally friendly solution.
Features
Only 50% energy consumption compared to fluorescent tubes. Lasts two times longer than fluorescent tubes
Retrofit replacement of existing T8 lamps on electromagnetic (EM) ballast installations
Applications
Parking lots and covered car parks
Warehouses and coldrooms
Signage
Philips Essential LEDtube
Product family information
Essential LEDtube is an affordable LED tube that is suitable for replacing T8 fluorescent lamps. The product provides a natural lighting effect for use in general lighting applications, as well as instant energy savings – an environmentally friendly solution.
Features
Affordable LED replacement for T8 fluorescent lamps. Energy consumption less than half that of normal fluorescent lamps
25,000 hours lifetime, double that of normal fluorescent lamps. No mercury; glass-free tube – no breakage concerns
Applications
Retail, offices
Industry, warehouses, public places, schools, hospitals, car parks
Philips LED InstantFit Lamps- Compatible with Instant Start ballasts
Product family information
Philips LED T8 InstantFit Lamps are an ideal energy saving choice for existing linear fluorescent fixtures.
Features
Instant on, no flicker or buzzFits into existing linear fixtures
Compatible with Instant Start ballasts (1) eliminating the need for rewiring and allows fixture to maintain original UL compliance.(1) Must follow guidelines for installation from Philips Quick Installation Guide included with lamp shipment.
Applications
Full light output in spaces with temperatures down to -22˚F (-30˚C)
Perfect for applications with frequent “on/off” switching cycles
Buildings that desire to be mercury free
MASTER LEDtube InstantFit HF T8
Product family information
The Philips MASTER LEDtube integrates a LED light source into a traditional fluorescent form factor. Its unique design creates a perfectly uniform visual appearance which cannot be distinguished from traditional fluorescent. The MASTER LEDtube Performance is the ideal solution for customers which have higher light requirements and the want to maximize value over lifetime.(need the longest lifetime). Full energy savings and TCO benefits.
Features
Only 50% energy consumption compared to fluorescent tubes. Extra-long life of 50,000 hours
Retrofit to existing T8 lamps on HF ballast installationsNo mercury
Applications
Parking lots / covered car parksWarehouses / coldrooms / signage
Transport and distribution areas
Essential LED tubes T5 Mains
The new generation of energy saving and affordable T5 Mains tube lighting
Lunera T8 LED Lamp- ballast compatible
Replacement for Bi-Pin 4ft T8 Fluorescent Lamp
The Lunera T8 LED Lamp is a plug-and-play LED replacement for 4ft T8 fluorescent lamps up to 32W. It operates off of the existing electronic ballast and is ideal for even light distribution in a commercial space.
Key Features
Replaces 32W 4ft Bi-Pin T8 fluorescent lamps with 14W LED lamps
Supports plug-and-play ballast-driven installation (Instant-, Rapid-, and Programmed-Start)
Delivers up to 1,800 lumens of usable light
